• Buzzer-Electronic and Piezo indicators have drive circuitry built in. Only DC voltage is needed.
• Transducers will require an external 4KHz square or sine wave signal.

Part No. Description          1-9      10+

 26BZ01  Buzzer; 3-6V DC;    $1.35   $1.25
         85db; solid state;
         Wire leads; 
         0.9" x 0.7" x 0.6"

 26BZ02  Buzzer; 4-8V DC;     1.65    1.40  
         85db; solid state;
         26BZ02 Connection Diagram    
         PC leads; 0.9" x 0.6" x 0.6"

 26BZ03  Buzzer; 8-16V DC;    1.60    1.35
         solid state; 85db; 
         Wire leads; 
         0.9" x 0.7" x 0.6"

 26BZ04  Buzzer; 8-10V DC;    1.60    1.35
         85db; Solid State
         Wire Leads; 
         0.9" x 0.7" x 0.6"

 26PZ01  Piezo indicator;     1.40    1.25
         2-30V DC; 80db; 
         Wire leads;
         Dia. = 0.9"; Ht = 0.5"

 26PZ02  Piezo indicator;     1.50    1.25
         2-30V DC; 80db; 
         PC leads; Dia. = 0.9"; 
         Ht. = 0.45"

 26PZ06  Piezo Indicator,     1.40    1.25
         1-16V DC; 90 db @ 
         12V; PC Leads
         Dia. = 0.6"; Ht.= 0.3"

 26TD01  Transducer;          1.10    0.90
         30Vpp max;
         80dbc 9Vpp; Wire leads

 26TD02  Transducer;          1.10    0.90 
         30Vpp max; 
         80dbc 9Vpp;
	PC leads

 26TD03  Transducer;          0.45    0.40 
         30Vpp max; 70db 
         3Vpp; PC leads
         Dia=12mm x 6.5m